Ats8 Set Number Of Seconds To Wait For Comma Dial Modifier Encountered In Dial String - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Defined values
<value>
1 to 255 Number of seconds in which connection must be established or call will be disconnected.
Examples
ATS7=1
OK
3.15 ATS8 Set Number of Seconds to Wait for Comma Dial Modifier
Encountered in Dial String
Description
Comma dial modifier time.
This parameter specifies the amount of time, in seconds, that the DCE shall pause, during signaling
of call addressing information to the network (dialing), when a "," (comma) dial modifier is
encountered in a dial string.
SIM PIN References
YES V.25ter
Syntax
Execute Command
ATS8=<value>
Defined values
<value>
0 DCE does not pause when "," encountered in dial string.
1 to 255 Number of seconds to pause. Recommended default setting
2 DCE pauses two seconds when "," is encountered.
Examples
ATS8=0
OK
SIM5350_ATC_V1.02
ERROR
Responses
OK
ERROR
21
6/9/2014