Demand Metering - GE MOTOR MANAGEMENT RELAY 469 Instruction Manual

5 ACTUAL VALUES
S DEMAND METERING
S [ENTER] for more
The values for current and power demand are shown here. Peak Demand information can be cleared using the
S1 469 SETUP \ CLEAR DATA \ CLEAR PEAK DEMAND DATA setpoint. Demand is shown only for positive real and pos-
itive reactive power (+Watts and +vars).
GE Power Management
ð
CURRENT
ENTER
DEMAND: 0 Amps
ESCAPE
REAL POWER
ESCAPE
DEMAND: 0 kW
MESSAGE
REACTIVE POWER
ESCAPE
DEMAND: 0 kvar
MESSAGE
APPARENT POWER
ESCAPE
DEMAND: 0 kVA
MESSAGE
PEAK CURRENT
ESCAPE
DEMAND: 0 Amps
MESSAGE
PEAK REAL POWER
ESCAPE
DEMAND: 0 kW
MESSAGE
PEAK REACTIVE POWER
ESCAPE
DEMAND: 0 kvar
MESSAGE
PEAK APPARENT POWER
ESCAPE
DEMAND: 0 kVA
MESSAGE
469 Motor Management Relay
5.3 A2 METERING DATA

5.3.7 DEMAND METERING

Range: 0 to 100000 A
Range: 0 to 50000 kW
Message not seen if VT Ratio is programmed as None
Range: 0 to 50000 kvar
Message not seen if VT Ratio is programmed as None
Range: 0 to 50000 kVA
Message not seen if VT Ratio is programmed as None
Range: 0 to 100000 A
Message not seen if VT Ratio is programmed as None
Range: 0 to 50000 kW
Message not seen if VT Ratio is programmed as None
Range: 0 to 50000 kvar
Message not seen if VT Ratio is programmed as None
Range: 0 to 50000 kVA
Message not seen if VT Ratio is programmed as None
5
5-13