Fault Display - NEC UNIVERGE SV8300 Pc Programming Manual

Fault Display

The [Fault Display] menu lets you read fault information stored on the SV8300, and view and conform it.
Fault Display provides the following functions:
• Display a read the fault information stored on the SV8300
• Clear the alarm lamp
NOTE 1: Establish an Establishing a Link before running the Fault Display. For more details, see "Es-
tablishing a Link".
NOTE 2: To do the Fault Display, the setting of system data (CMEA) is required beforehand.
STEP1: Do either of the following:
• Click [Fault Display] on the standard mode submenu.
• On the main menu, click [System] > [Maintenance] > [Fault Display] in this order.
The [Fault Display] screen appears in the work window.
(2)
No.
(1) [Read] button
(2) Access Date field
Page 2-12
Item Description
Reads fault information stored on the SV8300 and dis-
plays it in the Fault Display area.
Displays the date and time at which the fault informa-
tion was last read.
4-79
Chapter 4 Standard Mode
[Maintenance] Category
(1)
(5)
(3)
(4)
Continued on next page
NWA-033628-001 Rev.1.0