Autocal With Auto Or Dual Reporting Ranges Modes Selected - Teledyne T360 Operation Manual

Teledyne API Model T360/T360M Operation Manual

5.6.1. AutoCal with Auto or Dual Reporting Ranges Modes Selected

SETUP C.4
<SET
SETUP C.4
LOW
SETUP C.4
<SET
SETUP C.4
PREV NEXT
In order to automatically calibrate both the HIGH and LOW ranges, you must set up a separate
07272B DCN6552
RANGE TO CAL: LOW
EDIT
RANGE TO CAL: LOW
HIGH
RANGE TO CAL: HIGH
EDIT
SEQ 2) ZERO–SPAN, 2:00:30
MODE SET
sequence for each.
EXIT
ENTR
SETUP
EXIT
EXIT
NOTE
Calibration Procedures
EXIT returns to the
PRIMARY SETUP
Menu
183