Mib Ii Description - WAGO 750-370 Manual

encryption can be activated via "DES." The "Privacy Key" is used for
encrypting with DES. Notifications can be activated in SNMPv3 by selecting
"Notification/Trap enable V3"; to do this, the IP address of the notification
manager must be entered in "Notification Receiver IP".
Two independent SNMPv3 users can be defined and activated via Web page.
SNMPv1/v2c and SNMPv3 settings must remain independent. The different
SNMP versions can be activated/used either simultaneously or individually on
a controller.
3.1.10.2

MIB II description

MIB II, according to RFC1213, is divided into the following groups:
Group
•
•
•
•
•
•
•
•
Additional information
For detailed information about these individual groups, please refer to the
section "MIB II Groups" in the manual appendix.
WAGO-I/O-SYSTEM 750
PROFINET IO
System Group
Interface Group
IP Group
IpRoute Table
ICMP Group
TCP Group
UDP Group
SNMP Group
PROFINET IO 750-370
SNMP configuration
Identifier
1.3.6.1.2.1.1
1.3.6.1.2.1.2
1.3.6.1.2.1.4
1.3.6.1.2.1.4.21
1.3.6.1.2.1.5
1.3.6.1.2.1.6
1.3.6.1.2.1.7
1.3.6.1.2.1.11
• 115