Profisafe Safety Modules - WAGO 750-370 Manual

5.3.6 PROFIsafe Safety Modules

PNIO
Module type
PROFISAFE
PNIO
Module type
PROFISAFE
Standard Parameter
Asynchronous diagnostic
message
channel x
WAGO-I/O-SYSTEM 750
PROFINET IO
Configuration and Parameter Setting of the Modules
Module type member
753-661, 753-662, 753-667
Length Bit allocation
[Bit]
7 6 5
2 2 2
5
2) 2) 2)
E7 E6 E5 E4
F-Device-CRC
F- Device -CRC
F- Device -CRC
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
- - -
5
F-Host-CRC
F-Host-CRC
F-Host-CRC
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
2)
only available with 8-Channel F-Input modules
Value
locked*)
released
*) Default settings
Inputs
4 3 2 1 0
2 2 2 2 2
E2E
2)
E3 E1 E0
2
F-Status
Byte 0
Byte 1
Byte 2
- A3 A2 A1 A0
F-Control
Byte 0
Byte 1
Byte 2
Significance
The following occurs per diagnostics data sets and
diagnostics alarm when the receiver buffer overfills
•
not transferred to the I/O Controller
•
transferred to the I/O Controller
I/O Modules
Instances
PNIO-Data type
Input
OctetString [5] 1
Note
5 bytes are applied in the output process
image of the station proxy (fieldbus coupler)
and are assigned to the physical module by
fitting the slot with this module. Two byte
process data qualifiers (IOPS, IOCS) are
managed in the direction of the I/O controller
in the cyclic PROFINET IO telegram for this
module..
• 243
Output
1