WAGO 750-370 Manual page 98

98 • PROFINET IO 750-370
Diagnostics
The following tables describe the possible fault messages that are based on the
combination of fault type, extended fault type and additional value. The "xx"
symbols used for some additional values represent the signal channel
(0x0000 ... 0x0007) where the fault has been detected.
The faults described in the following table are faults occurring when
configuring both the station substitute (buscoupler) and the modules (I/O
modules). Configuration faults are coded using fault type 0x0010 in
accordance with the PROFINET IO standard.
Fault type "Configuration fault" (0x0010)"
Extended
fault type
Additional
value
0x0001 0xC0018001 The module type (Identifier) is not recognized.
0x0002 0xC0018002 The module type (Identifier) is invalid.
0x0003 0xC0018003 The status of the module is not allowed during configuration.
0x0004 0xC0018004 The length of the configuration data for the module is smaller
0x0005 0xC0018005 The length of the configuration data for the module is larger
0x0006 0xC0018006 The received configuration data for the module is not
0x0007 0xC0018007 The characteristics (Property) for the module are not
0x0008 0xC0018008 The reserved module parameter have an invalid value.
0x000A 0xC001800A Parameters are not permissible.
0x000B 0xC001800B Index of dataset is not allowed.
0x000C 0xC001800C Error when accessing module registers
0x000D 0xC001800D Data length is invalid when accessing module registers.
0x0010 0xC0018010 The substitute value behavior for the inputs of the module are
0x0011 0xC0018011 The substitute value behavior for the inputs of the module is
0x0014 0xC0018014 The reserved input parameters of the module have an invalid
0x0020 0xC0018020 The substitute value behavior for the outputs of the module
0x0021 0xC0018021 The substitute value behavior for the output of the module is
0x0024 0xC0018024 The reserved output parameters of the module have an
0x0030 0xC0018030 The combination of input and diagnostics is not supported in
0x0031 0xC0018031 The combination of input and diagnostics is not allowed in
Description
than expected.
than expected.
supported.
supported.
not supported.
not allowed.
value.
are not supported
not allowed.
invalid value.
the process image.
the process image.
WAGO-I/O-SYSTEM 750
PROFINET IO