WAGO 750-370 Manual page 212

212 • I/O Modules
Configuration and Parameter Setting of the Modules
PNIO
Module type
* 8DA(-8 BIT A)
* 8DA(-8 BIT I/O),
DIA in E-PA
Output see
* 8DA(-8 BIT A)
Length Bit allocation
[Bit]
7 6 5
2 2 2 2
8 A5 A4 A3 A2
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
A3 A2 A1 A0
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
A7 A6 A5 A4
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
8 D5 D4 D3 D2
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
D3 D2 D1 D0
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
D7 D6 D5 D4
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
Inputs
4 3 2 1 0
2 2 2 2
The fitting of slots with this module enables
A1 A0
the remaining bit locations to be previously
filled with output modules without bytes
A7 A6
opened with star (bit fields) in the output
process image of the station proxy(fieldbus
coupler). The bit locations marked in a light
red color are respectively occupied by
previous slot allocations.
One byte process data qualifier (IOPS) is
managed in the transmission direction of the
I/O controller in the cyclic PROFINET IO
telegram for these modules.
A7 A6 A5 A4
▪ ▪ ▪
A3 A2 A1 A0
The fitting of slots with this module enables
D1 D0
the remaining bit location to be previously
filled with input and / or output modules
D7 D6
without bytes opened with star (bit fields) in
the input and output process image of the
station proxy (fieldbus coupler). The bit
locations marked in a light red color are
respectively occupied by previous slot
allocations. One byte process data qualifier
(IOCS) is managed in the direction of the I/O
controller in the cyclic PROFINET IO
telegram for these modules.
D7 D6 D5 D4
▪ ▪ ▪
D3 D2 D1 D0
Note
WAGO-I/O-SYSTEM 750
PROFINET IO