WAGO 750-370 Manual page 100

100 • PROFINET IO 750-370
Diagnostics
Fault type "Configuration fault" (0x0010)"
Extended
fault type
Additional
value
0x0099 0xC0018099 The reserved station parameters (Table 0, register 3) have
0x009A 0xC001809A The connection for creating the process image (Table 0,
0x009B 0xC001809B The algorithm for creating the process image (Table 0,
0x009C 0xC001809C The integration of control and status data of complex
0x009D 0xC001809D Formatting of complex module data (Table 0, register 3) is
0x009E 0xC001809E Formatting of digital module data (Table 0, register 3) is not
0x009F 0xC001809F The data allocation (Table 0, register 3) is not allowed (neither
0x00A0 0xC00180A0 The setting for updating the input data (Table 0, register 3) is
0x00A1 0xC00180A1 The setting for updating the output data (Table 0, register 3)
0x00A2 0xC00180A2 The settings for the behavior of fieldbus faults (Table 0,
0x00A3 0xC00180A3 The settings for the behavior of internal data bus faults
0x00A4 0xC00180A4 The settings for activating the diagnostics (Table 0, register
0x00A5 0xC00180A5 The linking of the diagnostics data to the process image
0x00A6 0xC00180A6 The reserved station parameters (Table 0, register 4) have
... ...
0x00B2 0xC00180B2 The reserved station parameters (Table 0, register 4) have
0x00B3 0xC00180B3 The reserved station parameter (Table 100, register 75) have
0x00B4 0xC00180B4 The module setting (Table 100, register 75) is not allowed.
0x00B5 0xC00180B5 The reserved station parameter (Table 100, register 76) have
0x00B6 0xC00180B6 The reserved station parameter (Table 100, register 77) have
0x00B7 0xC00180B9 The setting for the behavior of PROFINET IO faults (stop
Description
invalid values.
register 3) is deactivated.
register 3) is not allowed.
modules (Table 0, register 3) is activated.
not allowed.
allowed.
bytes nor words).
not allowed (not asynchronous).
is not allowed (not asynchronous).
register 3) is not allowed.
(Table 0, register 3) is not allowed.
3) is not allowed.
(Table 0, register 3) is activated.
invalid values.
...
invalid values.
invalid values.
invalid values.
invalid values.
internal data bus) when using PROFIsafe modules is not
allowed.
WAGO-I/O-SYSTEM 750
PROFINET IO