Data Set For Identification And Servicing Purposes (I&M 0) - WAGO 750-370 Manual

3.1.7.2.4 Data Set for Identification and Servicing Purposes (I&M 0)
This data set allows to read the device information that may be required for
the system documentation and for service purposes.
Byte
offset
WAGO-I/O-SYSTEM 750
PROFINET IO
Information Description
0 0x00 0x20 Block type
2 0x00 0x38 Block length = 56 Byte
4 0x01 0x00 Block version 1.0
6 0x01 0x1D
Manufacturer ID WAGO 285
8 0x37 0x35
10 0x30 0x2D
12 0x33 0x37
14 0x30 0x20
16 0x20 0x20
... ... ...
26 0x20 0x20
28 0x30 0x30 MAC-ID WAGO filled out with spaces
"0030DEKLMNOP
30 0x33 0x30
32 0x44 0x45
34 0xKK 0xLL
36 0xMM 0xNN
38 0xOO 0xPP
40 0x20 0x20
42 0x20 0x20
44 0x00 0x05 Hardware version 01
46 0x56 0x01 Firmware version 'V' 01.00.12
48 0x00 0x0C
50 0x00 0x01
52 0x00 0x00
54 0x00 0x00
56 0x01 0x01
58 0x00 0x00 Only I&M0 is supported
PROFINET IO 750-370
Diagnostics
D
WAGO order number
filled out with spaces
„750-370 "
"
• 105