Mechanical Setup; Installation Position; Total Expansion - WAGO 750-370 Manual

2.6 Mechanical Setup

2.6.1 Installation Position

Along with horizontal and vertical installation, all other installation positions
are allowed.
Attention
In the case of vertical assembly, an end stop has to be mounted as an
additional safeguard against slipping.
WAGO item 249-116
WAGO item 249-117

2.6.2 Total Expansion

The length of the module assembly (including one end module of 12mm
width) that can be connected to the coupler/controller is 780 mm. When
assembled, the I/O modules have a maximum length of 768 mm.
Examples:
• 64 I/O modules of 12 mm width can be connected to one
• 32 I/O modules of 24 mm width can be connected to one
Exception:
The number of connected I/O modules also depends on which type of
coupler/controller is used. For example, the maximum number of I/O modules
that can be connected to a PROFIBUS coupler/controller is 63 without end
module. The maximum total expansion of a node is calculated as follows:
Warning
The maximum total length of a node without coupler/controller must not
exceed 780 mm. Furthermore, restrictions made on certain types of
couplers/controllers must be observed (e.g. for PROFIBUS).
WAGO-I/O-SYSTEM 750
PROFINET IO
coupler/controller.
coupler/controller.
The WAGO-I/O-SYSTEM 750
End stop for DIN 35 rail, 6 mm wide
End stop for DIN 35 rail, 10 mm wide
Mechanical Setup
• 25