Mitsubishi Electric MELDAS C6 Interface Manual page 317

B con-
Signal name
tact
THERMAL EXPANSION
—
OFFSET COMPENSATION
AMOUNT
[Function] [Operation]
Set the compensation amount for the axis feed error caused by the ball screw's thermal expansion.
Set "thermal expansion offset compensation amount" and "thermal expansion max. compensation
amount" as a set for each axis. Refer to "thermal displacement compensation amount" (R1600) for
details.
[Related signals]
Thermal expansion max. compensation amount (R2303)
Thermal displacement compensation amount (R1600)
B con-
Signal name
tact
THERMAL EXPANSION MAX.
—
COMPENSATION AMOUNT
[Function] [Operation]
Set the maximum compensation amount of the axis feed error caused by the ball screw's thermal
expansion. Set "thermal expansion offset compensation amount" and "thermal expansion max.
compensation amount" as a set for each axis. Refer to "displacement expansion compensation
amount" (R1600) for details.
[Related signals]
Thermal expansion offset compensation amount (R2302)
Thermal displacement compensation amount (R1600)
6. EXPLANATION OF INTERFACE SIGNALS
6.4 PLC Output Signals (Data Type: R***)
Signal
abbreviation
Signal
abbreviation
6-4-27
1st axis 2nd axis
R2302 R2352
1st axis 2nd axis
R2303 R2353
3rd axis
R2402
3rd axis
R2403