Download  Print this page

Mitsubishi Electric MELDAS C6 Interface Manual Page 224

Cnc.
Hide thumbs

Advertisement

B con-
Signal name
tact
JOG MODE
[Function]
JOG operation mode (manual operation) is selected.
[Operation]
When JOG mode signal (J) turns ON, JOG operation mode is selected.
Axis motion is started by turning ON the feed axis select plus (+J1~+J14) or minus (-J1~-J14)
signal after turning ON the jog mode and setting the manual feedrate (*JV1~*JV16).
For rapid traverse, rapid traverse command signal (RT) is turned ON together with this signal (J).
If the operation mode duplicates the other mode or if it is removed, the NC alarm "M01
OPERATION ERROR 0101" will occur.
[Related signals]
Feed axis select (+Jn, -Jn: Y44B, Y44C)
Manual feedrate (*JV1~*JV16: Y770~774)
Rapid traverse (RT: Y726)
B con-
Signal name
tact
HANDLE MODE
[Function]
"Handle feed operation" mode (manual operation) is selected.
[Operation]
When HANDLE mode signal (H) is turned ON, HANDLE FEED mode is selected.
Axis motion starts when the manual pulse generator handwheel is rotated after axis is selected by
handle axis select code (HS11~HS116, HS1S) and this signal is turned ON. Speed of the axis
motion depends on setting of feedrate multiplication (MP1~4).
If the operation mode duplicates the other mode or if it is removed, the NC alarm "M01
OPERATION ERROR 0101" will occur.
[Related signals]
(1) 1st handle axis No. (HS11~HS116: Y740~744), 1st handle axis valid (HS1S: Y747)
(2) 2nd handle axis No. (HS21~HS216: Y748~74C), 2nd handle axis valid (HS2S: Y74F) ..... For
2-axis handle specification
(3) 3rd handle axis No. (HS31~HS316: Y750~754), 3rd handle axis valid (HS3S: Y757) ..... For
3-axis handle specification
(4) Handle feedrate/incremental feedrate multiplication (MP1~MP4: Y780~782)
6. EXPLANATION OF INTERFACE SIGNALS
6.3 PLC Output Signals (Bit Type: Y***)
Signal
abbreviation
J
Signal
abbreviation
H
6-3-27
1st system
2nd system
Y700
Y7E0
1st system
2nd system
Y701
Y7E1
3rd system
Y8C0
3rd system
Y8C1

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric MELDAS C6

This manual is also suitable for:

Meldas c64Meldas c64t

Comments to this Manuals

Symbols: 0
Latest comments: