Mitsubishi Electric MELDAS C6 Interface Manual page 3

This manual describes the various signal interfaces and functions required when
creating MELDAS C6/C64/C64T sequence programs (built-in PLC).
Read this manual thoroughly before programming.
Thoroughly study the "Safety Precautions" on the following page to ensure safe use of
the MELDAS C6/C64/C64T.
Details described in this manual
CAUTION
For items described in "Restrictions" or "Usable State", the instruction manual
issued by the machine manufacturer takes precedence over this manual.
Items not described in this manual must be interpreted as "not possible".
This manual is written on the assumption that all option functions are added.
Refer to the specifications issued by the machine manufacturer before starting
use.
Some screens and functions may differ or may not be usable depending on the
NC version.
General precautions
The following documents are available as documents related to the contents of
this manual. Refer to these as required.
(1) MELDAS C6/C64
(2) MELDAS C6/C64
Introduction
PLC Programming Manual
(Ladder section with MELSEC tool)..... BNP-B2309
Network Manual................................... BNP-B2373