Mitsubishi Electric MELDAS C6 Interface Manual page 295

B con-
Signal name
tact
RESPONSE MONITOR
—
TIMER
[Function]
The maximum time to wait, after the data is transmitted, for a response from the client device to
which data was sent is set.
[Operation]
When the send connection is opened with "procedural", once the data is sent, the system will wait
for a response from the client device to which the data was sent. Set the maximum value for this
wait time as the response monitor timer value. If a response is not received within the set timer, the
BUFSND command will end as an error. (The control data complete status will become C022
The setting range is 2 to 32767 (0.5s unit).
The default is "60".
6. EXPLANATION OF INTERFACE SIGNALS
6.4 PLC Output Signals (Data Type: R***)
Signal
abbreviation
6-4-5
1st system 2nd system
R123 —
3rd system
—
.)
H