Siemens SINUMERIK Series Function Manual page 162

Diagnostics
7.1 Calling diagnostic views
Calling the diag‐ ...
nostics area:
Calling the diag‐
nostics area:
Optional:
...
Optional: ...
162
Press the "Select TM54F" softkey.
This softkey is only visible if there are several TM54F devices are in your drive system.
A selection of all of the TM54F devices that exist in the drive system is displayed.
Select the required TM54F.
Press the "OK" softkey to complete the selection of the TM54F.
Displaying SI checksums
Press the "SI checksums" softkey.
The "Checksum overview" window opens.
You can call the following individual checksums using the softkeys with the same name:
● Global checksums
● TM54F checksums
● Drive checksums
Displaying SI alarms
Press the "SI alarms " softkey.
The "Alarms" window is displayed.
Setting another drive for the diagnostics view
You can select another drive for the diagnostic views of the drives and the drive check‐
sums:
Press the "Drive +" or "Drive -" softkey.
The values of the next or the previous drive are displayed in the window.
- OR -
Press the "Select drive" softkey and select the desired drive directly from the displayed
list of available drives.
This softkey is only visible if there are several drives.
Press the "OK" softkey to complete the drive selection.
Exiting the diagnostics area
Proceed as follows to return to the previous diagnostics area:
Press the "<<Back" softkey.
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated