3.7
Safety overview
3.7.1
Calling the overview and detailed views
Procedure
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
1.
Select the "Start-up" operating area.
2.
Press the menu forward key and the "Safety" softkey.
3.
Press the "Overview" softkey if the "Overview" setting area is not active.
Overview - calling the details
Press the "Details" softkey.
Overview - calling the checksums
Press the "Checksums" softkey.
...
To exit the detailed view or the view of the checksums: press the "<<
Back" softkey.
The "Overview" window is displayed again.
Commissioning - drive-based
3.7 Safety overview
57