Siemens SINUMERIK Series Function Manual page 4

Preface
SINUMERIK
You can find information on SINUMERIK under the following link:
sinumerik)
Target group
Project engineers, technologists (of the machine manufacturers), commissioning engineers
(for systems or machines), and programmers.
Benefits
The function manual describes the functions so that the target group knows them and can
select them. It provides the target group with the information required to implement the
functions.
Planning and configuration phase, implementation phase, setup and commissioning phase.
Standard version
This documentation only describes the functionality of the standard version. Extensions or
changes made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or when
servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed information
about all types of the product and cannot cover every conceivable case of installation, operation
or maintenance.
Technical Support
Country-specific telephone numbers for technical support are provided in the Internet under
"Contact" (www.siemens.com/automation/service&support).
EC Declaration of Conformity
The EC declaration of conformity for the EMC directive can be found in the Internet
(www.siemens.com/automation/service&support).
There, as search term, enter the number 15257461 or contact your local Siemens office.
4
(www.siemens.com/
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated