Commissioning - TM54F
4.5 Configuring the TM54F
4.5.6
Working with parameter lists
As alternative to the dialog windows, you can also configure the TM54F functions directly via
a parameter list. The parameter list can be called from the dialog window of the particular
TM54F function. The list layout corresponds to the form of the parameter lists in the drive
parameters.
Figure 4-7
2 sublists are displayed in the list window:
● upper list = data of the TM54F master
● lower list = data of the TM54F slave
The following data are displayed in the individual columns of each list:
● Parameter No.
● Parameter name
● Input field (white)
For r parameters, only values are displayed (= display field).
● Units
Parameter lists in the view mode
In the view mode, by pressing the "Parameter list" softkey, you can go to the parameter list of
the dialog window. Changes are not possible in the view mode.
110
Example: TM54F parameter list
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated