Drive Checksums - Siemens SINUMERIK Series Function Manual

7.5.4

Drive checksums

Information about the checksums of the basic functions and extended functions is provided in
the "Drive checksums" window:
Figure 7-11
The following checksums are displayed:
● Checksums of the extended functions
Here, for monitoring channel 1 (Control Unit) and monitoring channel 2 (Motor Module), the
actual and reference checksums for the following extended functions are compared with
one another.
– Motion monitoring
– Actual values
– Hardware
● Checksums of the basic functions
Here, for monitoring channel 1 (Control Unit) and monitoring channel 2 (Motor Module), the
actual and reference checksums for the parameters are compared with one another.
Based on the status symbol, you can identify as to whether for the particular information, the
actual checksum matches the reference checksum.
● green = checksums match
● red = checksums are different.
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Diagnostics: Drive checksums
Diagnostics
7.5 Safety Integrated checksums
177