Table of Contents
Advertisement
the far right in the operation's row. The options that are available for that operation will be
ungreyed. Select one of the following options:
Refresh
RTT Results
Accumulated Results
Performance Monitoring Commands
Go to
Performance Monitoring Commands
page entries described above.
SLB™ Branch Office Manager User Guide
Refreshes the information on the Performance Monitoring - Operations page.
Displays the round trip time (RTT) results for the selected operation in a
separate window. The results show:
The time that the packet was sent,
The total round trip time for non-jitter probes or the source to destination
time and destination to source time for jitter probes, and
The status for the packet - OK/successful or an error condition.
For more information, see
Displays the accumulated statistics for the selected operation in a separate
window. The results show parameters used for the selected operation, and the
minimum, average and maximum round trip times for all probes. For jitter
probes, the results show minimum, average and maximum one way latency
times, as well as jitter results for source to destination and destination to
source. For all probes, a summary of lost packets and error conditions is
displayed.
to view CLI commands which correspond to the web
Round Trip Times
or
Error
6: Basic Parameters
Conditions).
83
Advertisement
Table of Contents
