Ip Filter Commands - Lantronix 100-120 VAC SLB User Manual

set hostlist delete
Syntax
set hostlist delete <Host List> [entry <Host Number>]
Description
Deletes a host list, or a single host entry from a host list.
show hostlist
Syntax
show hostlist <all|names|Host List Name>
Description
Displays the members of a host list.

IP Filter Commands

set ipfilter state
Syntax
set ipfilter state
Description
Enables or disables IP filtering for incoming network traffic.
set ipfilter mapping
Syntax
set ipfilter mapping <parameters>
Parameters
ethernet <1|2> state <disable>
ethernet <1|2> state <enable> ruleset <Ruleset Name>
deviceport <1..48> state <disable>
deviceport <1..48> state <enable> ruleset <Ruleset Name>
usbport <u1> state <disable>
usbport <u1> state <enable> ruleset <Ruleset Name>
SLB™ Branch Office Manager User Guide
14: Command Reference
303