Consoleflow Commands - Lantronix 100-120 VAC SLB User Manual

ConsoleFlow Commands

Configure interaction with ConsoleFlow management server. The communication with the server
is enabled by default, and can be disabled:
set cflow client <enable|disable>
Set interval between status updates, and firmware and configuration checks:
set cflow statusinterval <1-60 minutes> fwconfiginterval <1-72 hours>
Enable or disable firmware and configuration updates via ConsoleFlow:
set cflow fwupdate <enable|disable> configupdate <enable|disable>
Enable or disable reboots after firmware or configuration updates:
set cflow rebootafterupdate <enable|disable>
Set host and TCP port used for registration:
set cflow host <Registration Host> port <TCP Port>
Enable or disable using https for registration:
set cflow secureport <enable|disable>
Enable or disable validating certificates when using https:
set cflow validatecerts <enable|disable>
Enable or disable messaging services:
set cflow mqttstate <enable|disable>
Set host and TCP port used to for messaging:
set cflow mqtthost <Messaging Host> mqttport <TCP Port>
Enable or disable messaging security:
set cflow mqttsecurity <enable|disable>
Configure the device name and description used for registration:
set cflow devicename <Device Name> description <Device Description>
Configure the ConsoleFlow project tag used for registration:
set cflow projecttag <Project Tag>
Configure the timeout for ConsoleFlow Web Terminal sessions:
set cflow timeoutcli <1-1800 seconds>
set cflow timeoutdp <1-1800 seconds>
Configure the device port digital probe for determining managed device (MD) connection status:
set cflow digitalprobe <Device Port # or List or Name>
frequency <disable|15-3600 seconds>
Set the device ID:
set cflow id
Set the device key:
set cflow key
SLB™ Branch Office Manager User Guide
14: Command Reference
268