Table of Contents
Advertisement
Advanced Cellular Gateway Configuration
PIN Lock (check box) For the Sierra gateways, enable a lock so that the SIM card used by the gateway
Pin # for SIM Card/
Retype
SIM PUK/Retype
Fail-Over Cellular Gateway Firmware
Note:
The Sierra fail-over device must be selected in order for you to be able to update
the firmware.
Update Firmware
(check box)
Firmware Filename
Radio Firmware
Filename
Load Firmware via
Load Cellular Gateway Firmware Options
FTP/SFTP/SCP
Server
Path
Login
Password/Retype
Password
3. To save your entries, click the Apply button. Apply makes the changes immediately and
saves them so they will be there when the SLB branch office manager is rebooted.
Ethernet Counters
The
Network > Network Settings (bottom of page)
Ethernet ports since boot-up. The system automatically updates them.
Note:
For Ethernet statistics for a smaller time period, use the diag perfstat
command.
Network Commands
Go to
Network Commands (on page 307)
page entries described above.
SLB™ Branch Office Manager User Guide
cannot be used by anyone who does not have the PIN.
For the Sierra gateways, the PIN number for the SIM card used by the gateway.
May have up to 8 characters.
The Sierra gateway does not have this feature.
Select this option to update firmware on the Sierra gateway. The Functional
Firmware file and the Radio Firmware file will be transferred to the SLB using the
method selected by the Load Firmware via option. Once the files have been
transferred to the SLB, the SLB will initiate the firmware update on the Sierra
gateway.
Enter the name of the firmware filename exactly as it is represented.
Enter the name of the radio firmware filename exactly as it is represented.
Select the method to load the firmware from the options in the drop-down menu.
Enter the server address from where to load the firmware.
Enter the server directory pathway to the files.
Enter the user login for the FTP/SFTP/SCP server to verify access rights to load
new firmware.
Enter the password for the FTP/SFTP/SCP server to verify access rights to load
new firmware. Retype the password in the Retype Password field.
to view CLI commands which correspond to the web
page displays statistics for each of the SLB's
6: Basic Parameters
64
Advertisement
Table of Contents
