Local And Remote User Settings; Figure 11-2 User Authentication > Local/Remote Users - Lantronix 100-120 VAC SLB User Manual

Local and Remote User Settings

The system administrator can configure the SLB branch office manager to use local accounts and
remote accounts to authenticate users.
1. Click the User Authentication tab and select the Local/Remote Users option. The following
page displays.
The top of the page has entry fields for enabling local and remote users and for setting
password requirements. The bottom of the page displays a table listing and describing all local
and remote users.
To enable local and/or remote users:
2. Enter the following:
Enable Local Users
Multiple Sysadmin
Web Logins
Sysadmin Access
Limited to Console
Port
SLB™ Branch Office Manager User Guide
Figure 11-2 User Authentication > Local/Remote Users
Select to enable all local users except sysadmin. The sysadmin is always
available regardless of how you set the check box. Enabled by default.
Select to allow the sysadmin to have multiple simultaneous logins to the web
interface. Disabled by default.
Select to limit sysadmin logins to the physical SLB Console Port only. Disabled by
default.
Note:
For security purposes, full administrative access to the SLB via the default
sysadmin local user account can be limited to only the front console port of the
SLB device. See Limiting Sysadmin User Access (on page
11: User Authentication
45).
189