Table of Contents
Advertisement
Description
Resolves a host name into an IP address. You can optionally email the displayed information.
diag loopback
Syntax
diag loopback <Device Port Number or Name>[<parameters>]
Parameters
test <internal|external>
xferdatasize <Size In Kbytes to Transfer>
Default is 1 Kbyte.
Description
Tests a device port by transmitting data out the port and verifying that it is received correctly.
A special loopback cable comes with the SLB. To test a device port, plug the cable into the device
port and run this command. The command sends the specified Kbytes to the device port and
reports success or failure. The test is performed at 9600 baud. Only an external test requires a
loopback cable.
Top Command Synopsis
he diag top
Syntax
he diag top
Description
Displays CPU usage, memory usage and tasks: diag top [<parameters>]
Parameters
continuous <enable|disable>
count <Number of Iterations to Display>
delay <Delay in Seconds>
numlines <Number of Lines to Display>
Defaults:
count=1, delay = 5 seconds
SLB™ Branch Office Manager User Guide
14: Command Reference
297
Advertisement
Table of Contents
