6:
Basic Parameters
This chapter explains how to set the following basic configuration settings for the SLB branch
office manager using the SLB web interface or the CLI:
Network parameters that determine how the SLB branch office manager interacts with the
attached network
Firewall and routing
Date and time
Note:
If you entered some of these settings using a Quick Setup procedure, you may
update them here.
Requirements
If you assign a different IP address from the current one, it must be within a valid range, unique to
your network, and with the same subnet mask as your workstation.
To configure the unit, you need the following information:
Eth1
IP address:
Subnet mask:
Eth2
IP address (optional):
Subnet mask (optional): ________ - ________ - ________ - ________
Gateway:
DNS:
SLB™ Branch Office Manager User Guide
________ - ________ - ________ - ________
________ - ________ - ________ - ________
________ - ________ - ________ - ________
___________ - ___________ - ___________ - ___________
___________ - ___________ - ___________ - ___________
58