Appendix C: Adapters And Pinouts; Figure C-1 Rj45 Receptacle To Db25M Dce Adapter For The Slb (Pn 200.2066A) - Lantronix 100-120 VAC SLB User Manual

Appendix C: Adapters and Pinouts

The serial device ports of the SLB products match the RJ45 pinouts of the console ports of many
popular devices found in a network environment. The SLB branch office manager uses
conventional straight-through Category 5 fully pinned network cables for all connections when
used with Lantronix adapters. The cables are available in various lengths.
In most cases, you will need an adapter for your serial devices. Lantronix offers a variety of RJ45-
to-serial connector adapters for many devices. These adapters convert the RJ45 connection on
the SLB unit to a 9-pin or 25-pin serial connector found on other manufacturers' serial devices or
re-route the serial signals for connections to other devices that use RJ45 serial connectors.
Please check the cabling database on the Lantronix Web site at www.lantronix.com for suggested
cables and adapters for commonly used serial devices.
The console port is wired the same way as the device ports and has the same signal options.
Note:
You can view or change the console port settings using the LCDs and keypads on
the front panel, the
console port and set consoleport commands.
The adapters illustrated below are compatible with the Lantronix SLB models.

Figure C-1 RJ45 Receptacle to DB25M DCE Adapter for the SLB (PN 200.2066A)

Use PN 200.2066A adapter with a dumb terminal or with many SUN applications.
SLB™ Branch Office Manager User Guide
Devices > Console Port page, or the command line interface show
338