Figure 11-5 User Authentication > Ldap - Lantronix 100-120 VAC SLB User Manual

To configure the SLB unit to use LDAP to authenticate users:
1. Click the User Authentication tab and select LDAP. The following page displays.
2. Enter the following:
Enable LDAP
Server
SLB™ Branch Office Manager User Guide
Figure 11-5 User Authentication > LDAP
Displays selected if you enabled this method on the first User Authentication page.
If you want to set up this authentication method but not enable it immediately, clear
the checkbox.
The IP address or host name of the LDAP server.
11: User Authentication
198