Table of Contents
Advertisement
To configure the LCD through the SLB user interface:
The screens that are currently enabled are displayed in order in the left Enabled screens list.
Note:
See
Front Panel LCD Display and Keypads (on page 42)
parameters using the SLB device.
1. Select a screen to be removed from the Enabled Screens and click the
screen moves to the Disabled Screens list to the right.
2. Select a screen to be added from the Disabled Screens list and click the
screen is added to the Enabled Screens to the left.
3. Select a screen in the Enabled Screens list and click the
order of the screens.
Note:
The User Strings screen displays the 2 lines defined by the User Strings - Line 1
and Line 2 fields. By default, these user strings are blank.
4. Click Apply to save.
SLB™ Branch Office Manager User Guide
Figure 12-13 Maintenance > LCD/Keypad
12: Maintenance
to set up the basic
button. The
button. The
or
button to change the
245
Advertisement
Table of Contents
