Status/Info; Figure 8-6 Device Ports > Slp - Lantronix 100-120 VAC SLB User Manual

To enter SLP commands:
1. Enter the following:
Number of Outlets
Number of Expansion
Outlets
Login
Password
Retype Password
Prompt

Status/Info

Outlet Status
Environmental Status
SLB™ Branch Office Manager User Guide
Figure 8-6 Device Ports > SLP
Enter the number of outlets for a ServerTech CDU. This setting is not
applicable for an SLP unit.
Enter the number of outlets for a ServerTech CDU expansion unit. This setting
is not applicable for an SLP device.
User ID for logging into the SLP power manager.
Enter password for logging into the SLP unit.
Re-enter password for logging into the SLP power manager.
Enter the prompt displayed by the SLP unit or ServerTech CDU device. This
will default to a typical prompt for an SLP power manager or ServerTech CDU.
If you are unable to control the SLP unit or ServerTech CDU device, verify that
the prompt is set to the right value.
Note: If there is an SLP power manager and an SLP Expansion chassis, the
SLP unit is Tower A and the Expansion chassis is Tower B.
For Tower A or Tower B, select All Outlets or Single Outlet to view the status
of all outlets or a single outlet of the SLP power manager. If you select Single
Outlet, enter a value of 1-8 for the SLP8 or 1-16 for the SLP16 device.
Click the Outlet Status link to see the status of the selected outlet(s).
Click the link to view the environmental status (e.g., temperature and humidity)
of the SLP power manager.
8: Device Ports
121