Site Commands - Lantronix 100-120 VAC SLB User Manual

show services
Syntax
show services
Description
Displays current services.
show services trapenable
Syntax
show services trap enable
Description
Defines the set of SNMP traps that are sent by the SLB.

Site Commands

set site
Syntax
Create or edit a site:
set site add|edit <Site Name> [<parameters>]
Description
Configure a set of site-oriented modem parameters that can be activated by various modem-
related events (authentication, outbound network traffic for DOD connections, etc.). The site
parameters will override any parameters configured for the modem. To use sites with a modem,
enable 'usesites'. Sites can be used with the following modem states: dialin, dialback,
cbcpserver, dialondemand, dialin+ondemand, and dialback+ondemand.
Parameters
allowdialback <enable|disable>
auth <pap|chap>
cbcpnocallback <enable|disable>
deviceport <Device Port # or Name or none>
dialbackdelay <Dial-back Delay>
dialbacknumber <Phone Number>
dialbackretries <1-10>
dialoutlogin <User Login>
dialoutnumber <Phone Number>
localipaddr <negotiate|IP Address>
loginhost <User Login/CHAP Host>
SLB™ Branch Office Manager User Guide
14: Command Reference
323