Table of Contents
Advertisement
2. Enter the following:
Group Name
Listen Ports
Data Ports
Clear Port Buffers
Access Outlets
Enable for
Dial-back
Dial-back Number
SLB™ Branch Office Manager User Guide
Figure 11-9 User Authentication > Group
Enter a name for the group.
The ports users are able to monitor using the
command.
The ports users are able to monitor and interact with using the
command. Enter the port numbers or the range of
connect direct
port numbers (for example, 1, 5, 8, 10-15). U1 denotes the USB port on
the front of the SLB unit. For SLB models with an internal modem, U2
denotes the internal modem.
The ports whose port buffer users may clear using the
command.
locallog clear
The power outlets users may monitor and configure. (SLB only)
Select to grant a user. Users with dial-back access can dial into the SLB
unit and enter their login and password. Once the SLB device
authenticates them, the modem hangs up and dials them back. Disabled
by default.
The phone number the modem dials back on depends on this setting for
the device port. The user is either on a fixed number, or on a number that
is associated with the user's login (specified here).
11: User Authentication
connect listen
set
215
Advertisement
Table of Contents
