Table of Contents
Advertisement
To configure the Keypad:
1. Enter the following fields.
Keypad Locked
Restore FactoryDefaults Password /
Retype Password
2. Click Apply to save.
LCD/Keypad Commands
Go to
Administrative Commands (on page 255)
web page entries described above.
Banners
The
Maintenance > Banners
that display to users.
To configure banner settings:
1. Click the Maintenance tab and select Banners option.
2. Enter the following fields.
Welcome Banner
SLB™ Branch Office Manager User Guide
Select this to lock out any input to the keypad. The default is for
the keypad to be unlocked.
Enter the 6 digit key sequence entered at the keypad to restore
the SLB unit to factory defaults. The default is 999999.
page allows the system administrator to customize text messages
Figure 12-14 Maintenance > Banners
The text to display on the web interface or command line interface before the user
logs in. May contain up to 1024 characters. Single quote and double quote
characters are not supported. Welcome to the SLB is the default.
Note:
To create more lines use the \n character sequence.
to view CLI commands which correspond to the
12: Maintenance
246
Advertisement
Table of Contents
