Table of Contents
Advertisement
Group Access
3. Click the Apply button to save the changes.
Console Port Commands
Go to
Console Port Commands (on page 286)
web page entries described above.
Power Outlets
The SLB branch office manager has eight outlets that can provide power to other units in an IT
environment. Each outlet can be configured and controlled through the SLB unit. The SLB device
can issue an SNMP trap if the total current for all eight outlets exceeds a specified threshold.
To configure a power outlet:
1. Click the Devices tab and select the Power Outlets option. The following page displays:
Note:
Clicking any of the red P1 through P8 buttons, located at the top of each page
displayed, allows controlled configuration of the power outlets.
SLB™ Branch Office Manager User Guide
If undefined, any group can access the console port. If one or more groups are
specified (groups are delimited by the characters ' ' (space), ',' (comma), or ';'
(semicolon)), then any user who logs into the console port must be a member of
one of the specified groups, otherwise access will be denied. Users authenticated
via RADIUS may have a group (or groups) provided by the RADIUS server via the
Filter-Id attribute that overrides the group defined for a user on the SLB. A group
provided by a remote server must be either a single group or multiple groups
delimited by the characters ' ' (space), ',' (comma), ';' (semicolon), or '=' (equals) -
for example "group=group1,group2;" or "group1,group2,group3".
to view CLI commands which correspond to the
8: Device Ports
130
Advertisement
Table of Contents
