Table of Contents
Advertisement
To configure the SLB unit to use TACACS+ to authenticate users:
1. Click the TACACS+ tab and select TACACS+. The following page displays.
2. Enter the following:
Enable TACACS+
TACACS+ Servers 1-3 IP address or host name of up to three TACACS+ servers.
Secret/Retype Secret
Encrypt Messages
SLB™ Branch Office Manager User Guide
Figure 11-8 User Authentication > TACACS+
Displays selected if you enabled this method on the User Authentication page. If
you want to set up this authentication method but not enable it immediately, clear
the checkbox.
You can enable TACACS+ here or on the first User Authentication page. If you
enable TACACS+ here, it automatically displays at the end of the order of
precedence on the User Authentication page.
Shared secret for message encryption between the SLB branch office manager
and the TACACS+ server. Enter an alphanumeric secret of up to 127 characters.
Select the checkbox to encrypt messages between the SLB unit and the
TACACS+ server. Selected by default.
11: User Authentication
211
Advertisement
Table of Contents
