Dial-In (Text Mode) To A Remote Device; Figure 13-3 Dial-In (Text Mode) To A Remote Device - Lantronix 100-120 VAC SLB User Manual

5. Reboot the SUN server:
Reboot
<shutdown messages from SUN>
6. Use the escape sequence to escape from direct mode back to the command line interface.

Dial-in (Text Mode) to a Remote Device

This example shows a modem connected to an SLB device port, and a Sun server connected to
another SLB device port. You can configure the modem for text mode dial-in, so a remote user can
dial into the modem using a terminal emulation program and access the Sun server.
(HyperTerminal™, which comes with the Microsoft® Windows™ operating system, is an example
of a terminal emulation program.)
Remote User
In this example, the sysadmin would:
1. Configure the device port that the modem is connected to for dial-in:
[SLB]> set deviceport port 1 modemmode text
Device Port settings successfully updated.
[SLB]> set deviceport port 1 initscript "AT&F&K3&C1&D2%C0A"
Device Port settings successfully updated.
[SLB]> set deviceport port 1 auth pap
Device Port settings successfully updated.
[SLB]> set deviceport port 1 localsecret "password"
Device Port settings successfully updated.
[SLB]> set deviceport port 1 modemstate dialin
Device Port settings successfully updated.
[SLB]>
2. Configure the device port that is connected to the console port of the Sun UNIX server:
[SLB]> set deviceport port 2 baud 57600 flowcontrol none
Device Port settings successfully updated.
3. Dial into the SLB branch office manager via the modem using a terminal emulation program
on a remote PC. A command line prompt displays.
4. Log into the SLB.
CONNECT 57600
Welcome to the SLB
login: sysadmin
Password:
SLB™ Branch Office Manager User Guide

Figure 13-3 Dial-in (Text Mode) to a Remote Device

Modem
Phone System
Phone
Line
Sun UNIX Server
Serial Cable to Port 2
SLB
Branch Office Manager
Serial Cable
to Port 1
13: Application Examples
250