Routing Commands; Script Commands - Lantronix 100-120 VAC SLB User Manual

waiting for the reboot interval to expire (default is 20 seconds.) The switching delay and
the reboot interval are completely independent of each other.

Routing Commands

set routing
Syntax
set routing [parameters]
Parameters
rip <enable|disable>
route <1-64> ipaddr <IP Address> mask <Netmask> gateway <IP Address>
static <enable|disable>
version <1|2|both>
Description
Configures static or dynamic routing.
To delete a static route, set the IP address, mask, and gateway parameters to 0.0.0.0.
show routing
Syntax
show routing [resolveip <enable|disable>] [email <Email Address>]
Description
Sets the routing table to display IP addresses (disable) or the corresponding host names (enable).
You can optionally email the displayed information.

Script Commands

set script import
Syntax
set script import <interface|batch|custom> via <ftp|scp|copypaste>
[file <Script File>] [name <Script Name>] [host <IP Address
[login <User Login>] [path <Path to Script File>]
[filetype <expect|tcl|python>]
SLB™ Branch Office Manager User Guide
or Name>]
14: Command Reference
318