Table of Contents
Advertisement
8: Device Ports
02_Port-2_2.log
02_Port-2_3.log
02_Port-2_4.log
02_Port-2_5.log
Email/SNMP Notification
The system administrator can configure the SLB branch office manager to send an email alert
message indicating a particular condition detected in the device port log to the appropriate parties
or an SNMP trap to the designated NMS (see
Chapter 7: Services on page
84). The email or trap
is triggered when a user-defined number of characters in the log from your server or device is
exceeded, or a specific sequence of characters is received.
Use the
Device Ports - SLP Units (on page 120)
to set logging parameters on individual ports.
Sylogs Logging
Data can be logged to the system log. If this feature is enabled, the data will appear in the Device
Ports log, under the Info level. The log level for the Device Ports log must be set to Info for the data
to be saved to the system log. (See
Chapter 7: Services on page
84.)
To set logging parameters:
1. In the top section of the
Device Port Settings
page, click the Settings link in the Logging field.
The following page displays:
SLB™ Branch Office Manager User Guide
125
Advertisement
Table of Contents
