VT100 Terminals
Remote Access Server
In this setup, the SLB unit is connected to one or more modems by its device ports. Configure the
device ports on the
Settings section. Most customers use the modems in PPP mode to establish an IP connection to
the SLB branch office manager and either Telnet or SSH into the SLB unit. They could also select
text mode where, using a terminal emulation program, a user could dial into the SLB device and
connect to the command line interface.
Phone System
Reverse Terminal Server
In this scenario, the SLB branch office manager has one or more device ports connected to one or
more serial ports of a mainframe server. Users can access a terminal session by establishing a
Telnet or SSH session to the SLB unit. To configure the SLB device, select the Enable Telnet In
or Enable SSH In option on the
Unix Server
SLB™ Branch Office Manager User Guide
Figure 10-1 Terminal Server
SLB Branch Office Manager
Serial
Connections
Device Ports > Settings
Figure 10-2 Remote Access Server
Serial
Connections
Modems
Device Ports > Settings
Figure 10-3 Reverse Terminal Server
Serial
Sessions
Telnet Sessions
(via Network connection)
web page by selecting the Dial-in option in the Modem
SLB Branch Office Manager
page.
SLB Branch Office Manager
10: Connections
Server
Internal
Network
Network
Connections
PC
PC
Telnet/SSH
PC
Sessions
181