Table of Contents
Advertisement
From a queried system log (i.e.,
individual or to Lantronix Technical Support. See
To clear system logs:
1. From the
Maintenance > System Logs
2. Click the Clear Log button to clear all log information.
System Log Commands
Go to
System Log Commands (on page 329)
page entries described above.
Audit Log
The
Maintenance > Audit Log
configuration of the SLB. The audit log is disabled by default. Use the
Logging
page
(Chapter 7:
Each entry in the log file contains a date/time stamp, user login, and the action performed by the
user. The user may clear the log file and sort the log by date/time, user, and command. The audit
log is saved through SLB branch office manager reboots.
SLB™ Branch Office Manager User Guide
Figure 12-4 System Logs
Figure
12-4), you may email this information to a specific
page, select SLB Maintenance - System Logs.
to view CLI commands which correspond to the web
page displays a log of all actions that have changed the
Services) to enable the audit log and to configure its maximum size.
Emailing Logs and Reports (on page
Services > SSH/Telnet/
12: Maintenance
241).
234
Advertisement
Table of Contents
