Local Serial Connection To Network Device Via Telnet; Figure 13-4 Local Serial Connection To Network Device Via Telnet - Lantronix 100-120 VAC SLB User Manual

Welcome to the Secure Lantronix Branch Office Manager
Model Number: SLB882
For a list of commands, type 'help'.
[SLB]>
5. Connect to the SUN Unix server using the direct command.
[SLB]> connect direct deviceport 2
SunOS 5.7
login: frank
Password:
Last login: Wed Jul 14 16:07:49 from computer
Sun Microsystems Inc.SunOS 5.7Generic October 1998
SunOS computer 5.7 Generic_123485-05 sun4m sparc SUNW,SPARCstation-20
$
6. Use the escape sequence to escape from direct mode back to the command line interface.

Local Serial Connection to Network Device via Telnet

This example shows a terminal device connected to an SLB device port, and a Sun server
connected over the network to the SLB. When a connection is established between the device port
and an outbound Telnet session, users can access the Sun server as though they were directly
connected to it. (See
In this example, the sysadmin would:
1. Display the current settings for device port 2:
[SLB]> show deviceport port 2
___Current Device Port
Settings________________________________________________
Number: 2 Name: Port-2
Modem Settings-------------Data Settings-----------IP Settings-------
Modem State: disabled
Modem Mode: text
Timeout Logins: disabled
Local IP: negotiate
Remote IP: negotiate
Authentication: PAP
CHAP Host: <none>
CHAP Secret: <none>
NAT: disabled
Dial-out Login: <none>
Dial-out Password: <none>
Dial-out Number: <none>
SLB™ Branch Office Manager User Guide
Chapter 10: Connections on page

Figure 13-4 Local Serial Connection to Network Device via Telnet

Internet
Serial Cable to
Device Port 2
Baud Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: none
Flow Control: xon/xoff
Logins: disabled
Break Sequence: \x1bB
Check DSR: disabled
Close DSR: disabled
13: Application Examples
180).
Sun UNIX Server
Telnet: disabled
Telnet Port: 2002
SSH: disabled
SSH Port: 3002
IP: <none>
251