Table of Contents
Advertisement
Synchronize via
2. To save, click the Apply button.
Date and Time Commands
Go to
Date and Time Commands (on page 289)
web page entries described above.
Web Server
The Web Server supports all versions of the TLS protocol, but due to security concerns, does not
support any versions of the SSL protocol. The Web Server page allows the system administrator
to:
Configure attributes of the web server.
View and terminate current web sessions.
Import a site-specific SSL certificate.
Enable an iGoogle gadget that displays the status of ports on multiple SLBs.
To configure the Web Server:
1. Click the Services tab and select the Web Server option. The following page appears:
SLB™ Branch Office Manager User Guide
Select one of the following:
Broadcast from NTP Server: Enables the SLB branch office manager to
accept time information periodically transmitted by the NTP server. This is the
default if you enable NTP.
Poll NTP Server: Enables the SLB unit to query the NTP Server for the
correct time. If you select this option, complete one of the following:
Local: Select this option if the NTP servers are on a local network, and
enter the IP address of up to three NTP servers. This is the default, and it is
highly recommended.
Public: Select this option if you want to use a public NTP server, and select
the address of the NTP server from the drop-down list. This is not
recommended because of the high load on many public NTP servers. All
servers in the drop-down list are stratum-2 servers. (See
more information.) Each public NTP server has its own usage rules --please
refer to the appropriate web site before using one. Our listing them here is
to provide easy configuration but does not indicate any permission for use.
to view CLI commands which correspond to the
7: Services
www.ntp.org
for
100
Advertisement
Table of Contents
