Device Commands - Lantronix 100-120 VAC SLB User Manual

set ntp
Syntax
set ntp <one or more ntp parameters>
Parameters
localserver1 <IP Address or Hostname>
localserver2 <IP Address or Hostname>
localserver3 <IP Address or Hostname>
poll <local|public>
publicserver <IP Address or Hostname>
state <enable|disable>
sync <broadcast|poll>
Description
Synchronizes the SLB branch office manager with a remote time server using NTP.
show ntp
Syntax
show ntp
Description
Displays NTP settings.

Device Commands

set command
Syntax
set command <Device Port # or Name or List> <one or more parameters>
Parameters
slp auth login <User Login>
Establishes the authentication information to log into the SLP power manager attached to the
device port.
slp restart
Issues the CLI command the SLP device uses to restart itself.
slp outletcontrol state <on|off|cyclepower> [outlet <Outlet #>][tower
<A|B>]
SLB™ Branch Office Manager User Guide
14: Command Reference
290