CHAPTER 61 Debugging Web Services
61
Debugging Web Services
If you have configured remote Web services (see
debugging of the remote HTTP clients. You can configure the debug level from 1 to 3, where 3 is the
most detailed. The debug messages are sent to the Syslog server.
➢
To configure debugging of Web services:
1.
Open the Web Service Settings page (Setup menu > IP Network tab > Web Services folder >
Web Service Settings).
2.
In the 'Debug Level' field (RestDebugMode), enter the debug level (or disable debugging by
configuring it to 0):
3.
Click Apply.
Mediant 1000 Gateway & E-SBC | User's Manual
Remote Web Services
- 1060 -
), you can enable