Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ryobi RA-MSS20-B
Summary of Contents for Ryobi RA-MSS20-B
- Page 1 RA-MSS20-B AIR SHEAR OpERAtOR'S MANUAL ORIgINAL INStRUctIONS...
- Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
- Page 3 DEScRIptION 1. Shear head 4. Exhaust deflector 7. Fixed blade 2 10. Hex wrench 2. Trigger 5. Nitto style coupler 8. Movable blade 11. Hex bolt 3. Air inlet 6. Fixed blade 1 9. Seated bushing 12. Workpiece Fig.1 Fig.2 Fig.3 Fig.4 Fig.5...
-
Page 4: General Safety Rules
■ Avoid unsuitable postures as it is likely for these gENERAL SAfEty RULES positions not to allow counteracting of normal or ■ For multiple hazards, read and understand the safety unexpected movement of the tool. instructions before installing, operating, repairing, ■... -
Page 5: Noise Hazards
defects, asthma and/or dermatitis); risk assessment machine, additional information and/or warnings shall be and implementation of appropriate controls for these supplied to enable the risks arising from vibration to be hazards are essential. assessed and managed. ■ Risk assessment should include dust created by the ■... -
Page 6: Specifications
of time or not adequately managed and properly maintained. Wear eye protection. 2. Injuries and damage to property due to broken cutting attachments or the sudden impact of hidden objects during use. Wear ear protection. 3. Danger of injury and property damage caused by flying objects. -
Page 7: Troubleshooting
● It is most important that the product be properly ■ Air tool white oil is recommended for lubrication. lubricated by keeping the air line lubricator filled ■ Only lubricants recommended by the manufacturer and correctly adjusted. Without proper lubrication should be used. -
Page 8: Possible Cause
pROBLEM: product will not run. Air flows freely from exhaust. pOSSIBLE cAUSE One or more motor vanes are stuck due to material build up. REMEDIES ■ Pour air tool lubricating oil into air inlet. ■ Operate the product in short bursts of forward and/or reverse rotation where applicable. -
Page 9: Parts List
pARtS LISt Description Description Description Description Housing Compression Spring Washer Fixed blade 1 Pin 2.5 x 23 Trigger Gear wheel Fixed blade 2 Exhaust deflector Bolt M4 x 6 Idle gear Bolt M5 x 30 Air inlet plug O-ring 31 x 1.6 Chuck Dust cap Seal... - Page 12 Techtronic Industries (Australia) Pty. Ltd. 31 Gilby Road Mt Waverley, VIC 3149, Australia Techtronic Industries New Zealand Ltd. 2 Landing Drive, Mangere Auckland, New Zealand 2022...