File Saving Command - YASKAWA DX100 Instructions Manual

162529-1CD
DX100

3.4.3 File Saving Command

Command No. 0x0
Instance 0x0
Attribute 0x0
Service 0x16
32bit integer Byte 0
T
J
J
Status Respond by one in the followings
0x00 : respond normally
•
Other than 0x00
•
Added status size 0: no added status
•
1: 1 WORD
•
2: 2 WORD
•
Added status The error code specified by the
added status size
3 Transmission Procedure
3.4 File Control Command
Request
Sub header part
<Details>
File saving process
Data part
Byte 1 Byte 2 Byte3
E S T
O B .
B I
Answer
Sub header part
<Details>
: respond abnormally
"1" indicates 1 WORD of added status data, and "2"
indicates 2 WORD of added status data.
The error code of 1 WORD exists if the added status
code is "1" and that of 2 WORD exists if the code is "2".
Data part
No data part
3-90
<Details>
Specify the job names to be saved.
HW1480958
109 of 119