System Setting; Before Using The System; Parameter Setting; Setting Of Relevant Parameter - YASKAWA DX100 Instructions Manual

162529-1CD
DX100
2

System Setting

2.1
2.2
Parameter Details
RS022 Instance 0 permitted
(Instance 0 is used as the ordinal data)
RS029 A job during the playback operation, Loading of a variable
RS034 Timer to wait for a replay
RS035 Timer for monitoring end of text
2.3
Parameter Details
S2C541 Specify the permission of variable and I/O input during the play mode
(0: writing is allowed / 1: writing is not allowed)
S2C542 Specify the permission of variable and I/O input during the edit-lock status
(0: writing is allowed / 1: writing is not allowed)
S2C680 Specify the permission of the batch data backup function
(0: INVALID 1: Create RAMDISK at the STARTUP)
2 System Setting

2.1 Before using the System

To use the high-speed Ethernet server function, configuration of the
following settings are required.
Before using the System
The high-speed Ethernet server function is designed as an expansion
option to the DX100 Ethernet function. Before using this function, it is
required to make the DX100 Ethernet host control function available.
For more details, see chapter 3 "Ethernet Function Settings" in the
"DX100 OPTIONS INSTRUCTIONS FOR ETHERNET FUNCTION".

Parameter Setting

Set the following parameters before using this function.

Setting of Relevant Parameter

When setting 0 toS2C541 (writing is allowed), writing is
possible even during the playback operation. However,
NOTE
please be noted that this setting may affect the
manipulator's cycle time due to some writing timings or their
frequencies.
Following are the status to which specifying of the "edit-lock
status" is permitted by S2C542 parameter.
• During an alarm
NOTE
• When an external memory device is operated
• When the data transmission function is used
• Specific input EDIT_LOCK (#40064) is turned ON
2-1
Setting value
1
1
200
200
When shipping
1
1
1
HW1480958
17 of 119