YASKAWA DX100 Instructions Manual page 19

162529-1CD
DX100
2 System Setting
2.5 Setting of a Batch Data Backup Function
• A batch data backup function is available for software
version DS3.00 or higher.
• Refer to DX100 Instruction section 9.3 "Auto Backup
Function" for more details.
• Refer to DX100 Instruction section 9.4 "Loading the
Backup Data from the CompactFlash" for using files from
the restore system which is backed up by command from
NOTE
High Speed Ethernet Server Function.
• During an alarm is occurring, it would not be able to
change the device. Thus, operate after resetting the
alarm.
• When the parameter is S2C680=0, "RAMDISK" will not
appear in the "AUTO BACKUP SET" display. Make sure
to set the parameter S2C680.
2-3
HW1480958
19 of 119