162529-1CD
DX100
3.3.23 Start-up (Job Start) Command
Command No. 0x86
Instance
Fixed to "1".
Attribute
Fixed to "1".
Service
Set_Attribute_Single: 0x10
•
32bit integer
Byte 0
1
Data 1
Status
Respond by one in the followings
0x00 : respond normally
•
Other than 0x00
•
Added status size
0: no added status
•
1: 1 WORD
•
2: 2 WORD
•
Added status
The error code specified by the
added status size
3
Transmission Procedure
3.3 Respective Commands for Robot Control
Request
Sub header part
<Details>
Specify "1".
Specify "1".
Specify the accessing method to the data.
0x10 : Execute the specified request
Data part
(Data exists during the writing operation only)
Byte 1
Byte 2
Byte3
Answer
Sub header part
: respond abnormally
Data part
No data part
3-54
<Details>
Fixed to "1".
<Details>
"1" indicates 1 WORD of added status data, and "2"
indicates 2 WORD of added status data.
The error code of 1 WORD exists if the added status
code is "1" and that of 2 WORD exists if the code is "2".
HW1480958
73 of 119